Cisco Catalyst 4500 Series Configuration Manual page 631

Chapter 2
Use the generic-error-message command to set an error message notifying the sender that the
PPPoE Discovery packet was too large.
Examples
The following example shows how to set an access-node-identifier:
Switch(config)# pppoe intermediate-agent format-type access-node-identifier string
switch-abc-123
The following example shows how to unset a generic-error-message:
Switch(config)# no pppoe intermediate-agent format-type generic-error-message
Related Commands Command
show pppoe
intermediate-agent interface
Description
Displays the PPPoE Intermediate Agent configuration and
statistics (packet counters).
Catalyst 4500 Series Switch Cisco IOS Command Reference—Release XE 3.9.xE and 15.2(5)Ex
pppoe intermediate-agent format-type (global)
2-591