Macro Global Description - Cisco Catalyst 4500 Series Configuration Manual

macro global description

macro global description
To enter a description about the macros that are applied to the switch, use the macro global description
global configuration command on the switch stack or on a standalone switch. Use the no form of this
command to remove the description.
Syntax Description
text
Command Default
This command has no default setting.
Command Modes Global configuration mode
Command History Release
12.2(31)SG
Usage Guidelines This command associates comment text, or the macro name, with a switch. When multiple macros are
applied on a switch, the description text will be from the last applied macro.
Examples The following example shows how to add a description to a switch:
Switch(config)# macro global description udld aggressive mode enabled
You can verify your settings by entering the show parser macro description privileged EXEC
command.
Related Commands Command
macro global apply cisco-global
Catalyst 4500 Series Switch Cisco IOS Command Reference—Release XE 3.9.xE and 15.2(5)Ex
2-476
macro global description text
no macro global description text
Enters a description about the macros that are applied to the switch.
Modification
This command was introduced on the Catalyst 4500 series switch.
Description
Applies the system-defined default template to the switch.
Chapter 2