Cisco Catalyst 4500 Series Configuration Manual page 198
Ios software configuration guide isco ios xe 3.9.0e and ios 15.2(5)ex
Hide thumbs
Also See for Catalyst 4500 Series:
- Software configuration manual (2086 pages) ,
- Administration manual (1814 pages) ,
- Configuration manual (1610 pages)
Table of Contents
Advertisement
debug fabric auto
debug fabric auto
To troubleshoot your fabric domain configuration, use the debug fabric auto command.
Syntax Description
trace
level error
level verbose
Command Default
None.
Command Modes
Privileged EXEC
Command History
Release
3.9.01E
Usage Guidelines
Use these debug commands to troubleshoot your fabric domain configuration, and trace the commands
auto-generated by the fabric auto command, and display the errors encountered.
The no debug fabric auto level verbose command disables the display of all the messages encountered
during fabric provisioning.
Catalyst 4500 Series Switch Cisco IOS Command Reference—Release XE 3.9.xE and 15.2(5)Ex
2-160
debug fabric auto {trace | level {error | verbose}}
Modification
This command was introduced on the Catalyst 4500-E series switch using a
Supervisor Engines 8-E and 8L-E.
Chapter 2
Cisco IOS Commands for the Catalyst 4500 Series Switches
Enables tracing for the commands auto-generated when the fabric-auto
command is executed.
Displays the errors encountered during fabric overlay provisioning.
Displays the maximum number of messages encountered during fabric
overlay provisioning.
OL-30934-01
Advertisement
Table of Contents
