Show Qos Dbl - Cisco Catalyst 4500 Series Configuration Manual

show qos dbl

show qos dbl
To display global Dynamic Buffer Limiting (DBL) information, use the show qos dbl command.
Syntax Description
This command has no arguments or keywords.
Command Default
This command has no default settings.
Command Modes Privileged EXEC mode
Command History Release
12.1(13)EW
Usage Guidelines
This command is not supported on Supervisor Engine 6-E, Supervisor Engine 6L-E, Catalyst 4900M,
Catalyst 4948E, and Catalyst 4948E-F.
Examples The following example shows how to display global DBL information:
Switch# show qos dbl
DBL is enabled globally
DBL flow includes vlan
DBL flow includes l4-ports
DBL does not use ecn to indicate congestion
DBL exceed-action mark probability:15%
DBL max credits:15
DBL aggressive credit limit:10
DBL aggressive buffer limit:2 packets
DBL DSCPs with default drop probability:
Switch#
Related Commands Command
qos account layer-all encapsulation
Catalyst 4500 Series Switch Cisco IOS Command Reference—Release XE 3.9.xE and 15.2(5)Ex
2-946
show qos dbl
Modification
This command was introduced on the Catalyst 4500 series switch.
1-10
Description
Globally enables QoS functionality on the switch.
Chapter 2
OL-30934-01