Show Vlan Internal Usage - Cisco Catalyst 4500 Series Configuration Manual
Ios software configuration guide isco ios xe 3.9.0e and ios 15.2(5)ex
Hide thumbs
Also See for Catalyst 4500 Series:
- Software configuration manual (2086 pages) ,
- Administration manual (1814 pages) ,
- Configuration manual (1610 pages)
Table of Contents
Advertisement
Chapter 2
show vlan internal usage
To display information about the internal VLAN allocation, use the show vlan internal usage command.
Syntax Description
id vlan-id
Command Default
This command has no default settings.
Command Modes
Privileged EXEC mode
Command History
Release
12.1(19)EW
Examples
The following example shows how to display information about the current internal VLAN allocation:
Switch# show vlan internal usage
VLAN Usage
---- --------------------
1025 -
1026 -
1027 -
1028 -
1029 Port-channel6
1030 GigabitEthernet1/2
1032 FastEthernet3/20
1033 FastEthernet3/21
1129 -
The following example shows how to display information about the internal VLAN allocation for a
specific VLAN:
Switch# show vlan id 1030 internal usage
VLAN Usage
---- --------------------
1030 GigabitEthernet1/2
Related Commands
Command
vlan internal allocation policy
show vlan [id vlan-id] internal usage
(Optional) Displays internal VLAN allocation information for the specified VLAN;
valid values are from 1 to 4094.
Modification
This command was introduced on the Catalyst 4500 series switch.
Catalyst 4500 Series Switch Cisco IOS Command Reference—Release XE 3.9.xE and 15.2(5)Ex
Description
Configures the internal VLAN allocation scheme.
show vlan internal usage
2-999
Advertisement
Table of Contents
