Cisco Catalyst 4500 Series Configuration Manual page 634

pppoe intermediate-agent limit rate
pppoe intermediate-agent limit rate
To limit the rate of the PPPoE Discovery packets arriving on an interface, use the
pppoe intermediate-agent limit rate command. To disable the feature, use the no form of this
command.
Syntax Description
number
Command Default
This command has no default settings.
Command Modes Interface configuration mode
Command History Release
12.2(50)SG
Usage Guidelines
If this command is used and the PPPoE Discovery packets that are received exceeds the rate set, the
interface will be error-disabled (shutdown).
Examples
The following example shows how to set a rate limit for an interface:
Switch(config-if)# pppoe intermediate-agent limit rate 50
The following example shows how to disable rate limiting for an interface:
Switch(config-if)# no pppoe intermediate-agent limit rate
Related Commands Command
pppoe intermediate-agent
(interface)
Catalyst 4500 Series Switch Cisco IOS Command Reference—Release XE 3.9.xE and 15.2(5)Ex
2-594
pppoe intermediate-agent limit rate number
no pppoe intermediate-agent limit rate number
Specifies the threshold rate of PPPoE Discovery packets received on this
interface in packets-per-second.
Modification
This command was introduced on the Catalyst 4500 series switch.
Description
Enables the PPPoE Intermediate Agent feature on an interface
Chapter 2