Cisco Catalyst 4500 Series Configuration Manual page 333

Chapter 2
interface (virtual switch)
To select an interface to configure and enter interface configuration mode, use the interface global
configuration mode command.
Syntax Description interface
switch-num
slot
port
.subinterface
Command Default
No interface types are configured.
Command Modes
Global configuration mode
Command History Release
12.2(52)SG
Usage Guidelines
Table 2-9
Table 2-9
Keyword
fastethernet
gigabitethernet
tengigabitethernet
vlan
port-channel
null
tunnel
interface [interface switch-num/slot/port.subinterface}
Specifies the interface to be configured; see
Specifies a switch ID.
Specifies a slot number.
Specifies a port number.
Specifies the port subinterface number.
lists the valid values for type.
Valid type Values
Definition
Fast Ethernet 802.3
Gigabit Ethernet IEEE 802.3z interface.
10-Gigabit Ethernet IEEE 802.3ae interface.
VLAN interface; see the
Port channel interface; see the
Null interface; the valid value is 0.
Tunnel interface
Catalyst 4500 Series Switch Cisco IOS Command Reference—Release XE 3.9.xE and 15.2(5)Ex
Modification
Support introduced on the Catalyt 4500 Series Switch.
interface vlan
interface port-channel
interface (virtual switch)
Table 2-9 for valid values.
command.
command.
2-293