Chapter 2
Cisco IOS Commands for the Catalyst 4500 Series Switches
debug backup
To debug the backup events, use the debug backup command. To disable the debugging output, use the
no form of this command.
Syntax Description
This command has no arguments or keywords.
Command Default
This command has no default settings.
Command Modes
Privileged EXEC mode
Command History
Release
12.1(8a)EW
Examples
The following example shows how to debug the backup events:
Switch# debug backup
Backup events debugging is on
Switch#
Related Commands
Command
undebug backup (same as no
debug backup)
debug backup
no debug backup
Modification
This command was introduced on the Catalyst 4500 series switch.
Catalyst 4500 Series Switch Cisco IOS Command Reference—Release XE 3.9.xE and 15.2(5)Ex
Description
Disables debugging output.
debug backup
2-149