Cisco Catalyst 4500 Series Configuration Manual page 230

define interface-range
define interface-range
To create a macro of interfaces, use the define interface-range command.
Syntax Description
macro-name
interface-range
Command Default This command has no default settings.
Command Modes Global configuration mode
Command History Release
12.1(8a)EW
Usage Guidelines The macro name is a character string of up to 32 characters.
A macro can contain up to five ranges. An interface range cannot span modules.
When entering the interface-range, use these formats:
•
•
The valid values for interface-type are as follows:
•
•
•
Examples
The following example shows how to create a multiple-interface macro:
Switch(config)# define interface-range macro1 gigabitethernet 4/1-6, fastethernet 2/1-5
Switch(config)#
Related Commands Command
interface range
Catalyst 4500 Series Switch Cisco IOS Command Reference—Release XE 3.9.xE and 15.2(5)Ex
2-192
define interface-range macro-name interface-range
Name of the interface range macro; up to 32 characters.
List of valid ranges when specifying interfaces; see the "Usage Guidelines"
section.
Modification
This command was introduced on the Catalyst 4500 series switch.
interface-type {mod}/{first-interface} - {last-interface}
interface-type {mod}/{first-interface} - {last-interface}
FastEthernet
GigabitEthernet
Vlan vlan_id
Chapter 2 Cisco IOS Commands for the Catalyst 4500 Series Switches
Description
Runs a command on multiple ports at the same time.
OL-30934-01