Cisco Catalyst 4500 Series Configuration Manual page 964

show pagp dual-active (virtual switch)
show pagp dual-active (virtual switch)
To display dual-active detection information, use the show pagp dual-active command in EXEC mode.
Syntax Description
group-number
Command Default This command has no default settings.
Command Modes Privileged EXEC mode
Command History Release
12.2(52)SG
Examples The following example shows how to display dual-active detection information:
Router# show pagp dual-active
PAgP dual-active detection enabled: Yes
PAgP dual-active version: 1.1
Channel group 1
Dual-Active trusted group: Yes
Channel group 2
Dual-Active trusted group: Yes
Channel group 3 dual-active detect capability w/nbrs
Dual-Active trusted group: No
Port
Fa1/2/33
Router#
The following example shows how to display dual-active detection information for a specific port
channel:
Router# show pagp dual-active
PAgP dual-active detection enabled: Yes
PAgP dual-active version: 1.1
Channel group 3 dual-active detect capability w/nbrs Dual-Active trusted group: No
Port
Fa1/2/33
Channel group 4
Dual-Active trusted group: Yes
No interfaces configured in the channel group
Channel group 5
Dual-Active trusted group: Yes
Channel group 5 is not participating in PAGP
Channel group 10 dual-active detect capability w/nbrs Dual-Active trusted group: Yes
Port
Gi1/6/1
Catalyst 4500 Series Switch Cisco IOS Command Reference—Release XE 3.9.xE and 15.2(5)Ex
2-916
show pagp [group-number] dual-active
(Optional) Channel-group number. Range: 1 to 256 with a maximum of 64 values.
Modification
This command was introduced on the Catalyst 4500 series switch.
Dual-Active Partner
Detect Capable Name
No None
Dual-Active Partner
Detect Capable Name
No None
Dual-Active Partner
Detect Capable Name
Yes mr-rogers-nbr
Partner Partner
Port Version
None N/A
Partner Partner
Port Version
None N/A
Partner Partner
Port Version
Gi1/5/1 1.1
Chapter 2
OL-30934-01