Cisco Catalyst 4500 Series Configuration Manual page 930

show macro auto device
show macro auto device
Use the show macro auto device global configuration command to display the default information for
a device, including builtin function name and the parameters that can be provided for the commands
when executing the builtin function.
Syntax Description device_id
Command Default
None
Command Modes
Global configuration
Command History Release
12.2(54)SG
Usage Guidelines
This command displays the default values as well as the currently used values if configured.
Examples
The following example shows how to display the default information for the device access-point:
Switch# show macro auto device access-point
Device:access-point
Default Macro:CISCO_AP_AUTO_SMARTPORT
Current Macro:CISCO_AP_AUTO_SMARTPORT
Configurable Parameters:NATIVE_VLAN
Defaults Parameters:NATIVE_VLAN=1
Current Parameters:NATIVE_VLAN=1
Related Commands Command
show macro auto event
manager
show macro auto interface
Catalyst 4500 Series Switch Cisco IOS Command Reference—Release XE 3.9.xE and 15.2(5)Ex
2-882
show macro auto device device_id
Specifies the device ID.
Modification
This command was introduced on the Catalyst 4500 series switch.
Description
Refer to the Command Reference in the IOS library
Display Auto SmartPorts status and the functions applied on an
interface.
Chapter 2
OL-30934-01