Cisco Catalyst 4500 Series Configuration Manual page 164

clear netflow-lite monitor statistics interface
clear netflow-lite monitor statistics interface
NetFlow-lite is supported only on the Catalyst 4948E and Catalyst 4948E-F Ethernet switches.
Note
To clear statistics of a packet sampler at a monitor, use the clear netflow-lite monitor statistics
interface command.
Syntax Description vlan-id
Command Default
None
Command Modes Privileged EXEC mode
Command History Release
15.0(2)SG
Examples
The following examples show how to clear statistics of a packet sampler at a monitor:
Switch# clear netflow-lite monitor 1 statistics int gi1/1
Switch# clear netflow-lite monitor 1 statistics vlan 10
Related Commands Command
clear netflow-lite exporter
statistics
Catalyst 4500 Series Switch Cisco IOS Command Reference—Release XE 3.9.xE and 15.2(5)Ex
2-126
clear netflow-lite monitor statistics interface vlan-id
Specifies an interface.
Modification
Command introduced on the Catalyst 4948E and Catalyst 4948E-F Ethernet
switches.
Chapter 2 Cisco IOS Commands for the Catalyst 4500 Series Switches
Description
Clear the collector statistics.
OL-30934-01