Cisco Catalyst 4500 Series Configuration Manual page 629

Chapter 2
pppoe intermediate-agent (interface vlan-range)
This command takes effect only if you enable the pppoe intermediate-agent global command.
Note
To enable PPPoE Intermediate Agent on an interface VLAN range, use the pppoe intermediate-agent
global command. To disable the feature, use the no form of this command.
Syntax Description
This command has no arguments or keywords.
Command Default Disabled on all VLANs on all interfaces
Command Modes Interface vlan-range configuration mode
Command History Release
12.2(50)SG
Usage Guidelines Although this command takes effect irrespective of the pppoe intermediate-agent (interface
configuration mode) command, you must enable the pppoe intermediate-agent (global configuration
mode) command.
Examples The following example shows how to enable PPPoE Intermediate Agent on a range of VLANs:
Switch(config-if)# vlan-range 167-368
Switch(config-if-vlan-range)# pppoe intermediate-agent
The following example shows how to disable PPPoE Intermediate Agent on a single VLAN:
Switch(config-if)# vlan-range 268
Switch(config-if-vlan-range)# no pppoe intermediate-agent
Related Commands Command
pppoe intermediate-agent
(interface)
pppoe intermediate-agent
no pppoe intermediate-agent
Modification
This command was introduced on the Catalyst 4500 series switch.
Catalyst 4500 Series Switch Cisco IOS Command Reference—Release XE 3.9.xE and 15.2(5)Ex
Description
Enables the PPPoE Intermediate Agent feature on an interface.
pppoe intermediate-agent (interface vlan-range)
2-589