flowcontrol
The following example shows how to set receive flow control to desired:
Switch(config-if)# flowcontrol receive desired
Switch(config-if)#
Related Commands
Command
interface port-channel
interface range
show flowcontrol
show running-config
speed
Catalyst 4500 Series Switch Cisco IOS Command Reference—Release XE 3.9.xE and 15.2(5)Ex
2-268
Chapter 2
Cisco IOS Commands for the Catalyst 4500 Series Switches
Description
Accesses or creates a port-channel interface.
Runs a command on multiple ports at the same time.
Displays the per-interface status and statistics related to
flow control.
Displays the running-configuration for a switch.
Configures the interface speed.
OL-30934-01