Cisco Catalyst 4500 Series Configuration Manual page 715

2 2
Chapter 2
show access-group mode interface
To display the ACL configuration on a Layer 2 interface, use the show access-group mode interface
command.
Syntax Description interface
interface-number
Command Default
This command has no default settings.
Command Modes Privileged EXEC mode
Command History Release
12.1(19)EW
12.2(25)EW
Usage Guidelines
The valid values for the port number depend on the chassis used.
Examples The following example shows how to display the ACL configuration on the Fast Ethernet interface 6/1:
Switch# show access-group mode interface fa6/1
Interface FastEthernet6/1:
Access group mode is: merge
Switch#
Related Commands Command
access-group mode
show access-group mode interface [interface interface-number]
(Optional) Interface type; valid values are ethernet, fastethernet,
gigabitethernet, tengigabitethernet, and port-channel.
(Optional) Interface number.
Modification
This command was introduced on the Catalyst 4500 series switch.
Support for the 10-Gigabit Ethernet interface was introduced on the
Catalyst 4500 series switch.
Catalyst 4500 Series Switch Cisco IOS Command Reference—Release XE 3.9.xE and 15.2(5)Ex
Description
Specifies the override modes (for example, VACL overrides
PACL) and the non-override modes (for example, merge or strict
mode).
show access-group mode interface
2-667