Chapter 2
macro global apply system-cpp
To apply the control plane policing default template to the switch, use the macro global apply
system-cpp global configuration command on the switch stack or on a standalone switch.
Syntax Description
This command has no keywords or variables.
Command Default
This command has no default setting.
Command Modes
Global configuration mode
Command History
Release
12.2(31)SG
Examples
The following example shows how to apply the system-defined default to the switch:
Switch (config)# macro global apply system-cpp
Switch (config)#
Related Commands
Command
macro global apply cisco-global
macro global description
macro global apply system-cpp
Modification
This command was introduced on the Catalyst 4500 series switch.
Catalyst 4500 Series Switch Cisco IOS Command Reference—Release XE 3.9.xE and 15.2(5)Ex
Description
Applies the system-defined default template to the switch.
Enters a description about the macros that are applied to the
switch.
macro global apply system-cpp
2-475