ancp mode client
ancp mode client
To set the router to become an ANCP client, use the ancp mode client command.
Syntax Description
This command has no arguments or keywords.
Command Default
This command has no default settings.
Command Modes
Global configuration mode
Command History
Release
12.2(50)SG
Usage Guidelines
To fully activate ANCP, the administrator must also set the ANCP server IP address to which the ANCP
client must connect.
Examples
The following example shows how to set the router to become an ANCP client:
Switch# ancp mode client
Related Commands
Command
ancp client server
Catalyst 4500 Series Switch Cisco IOS Command Reference—Release XE 3.9.xE and 15.2(5)Ex
2-18
ancp mode client
Modification
This command was introduced on the Catalyst 4500 series switch.
Chapter 2
Cisco IOS Commands for the Catalyst 4500 Series Switches
Description
Displays multicast streams activated by ANCP.
OL-30934-01