Cisco Catalyst 4500 Series Configuration Manual page 239

Chapter 2 Cisco IOS Commands for the Catalyst 4500 Series Switches
destination preferred-msg-format
To configure a preferred message format, use the destination preferred-msg-format command.
Syntax Description
long-text
short-text
xml
Command Default xml
Command Modes
cfg-call-home-profile
Command History Release
12.2(52)SG
Usage Guidelines To enter profile call-home configuration submode, use the profile command in call-home configuration
mode.
Examples The following example shows how to configure the preferred message format as long text:
Switch(config)# call-home
Switch(cfg-call-home)# profile cisco
Switch(cfg-call-home-profile)# destination preferred-msg-format long-text
Switch(cfg-call-home-profile)#
Related Commands Command
destination address
destination message-size-limit bytes
destination transport-method
profile
subscribe-to-alert-group all
subscribe-to-alert-group configuration
subscribe-to-alert-group diagnostic
destination preferred-msg-format {long-text | short-text | xml}
Sends the message in long-text format.
Sends the message in short-text format.
Sends the message in XML format.
Modification
This command was introduced on the Catalyst 4500 series switch.
Catalyst 4500 Series Switch Cisco IOS Command Reference—Release XE 3.9.xE and 15.2(5)Ex
Description
Configures the destination e-mail address or URL to which
Call Home messages will be sent.
Configures a maximum destination message size for the
destination profile.
Enables the message transport method.
Enters profile call-home configuration submode
Subscribes to all available alert groups.
Subscribes this destination profile to the Configuration
alert group.
Subscribes this destination profile to the Diagnostic alert
group.
destination preferred-msg-format
2-201