Cisco Catalyst 4500 Series Configuration Manual page 725

Chapter 2
show auto install status
To display the status of an automatic installation, use the show auto install status command.
Syntax Description
This command has no arguments or keywords.
Command Default
This command has no default settings.
Command Modes Privileged EXEC mode
Command History Release
12.2(20)EW
Examples
The following example shows how to display the IP address of the TFTP server and to display whether
or not the switch is currently acquiring the configuration file on the TFTP server:
Switch# show auto install status
Status
DHCP Server
TFTP Server
Config File Fetched : Undetermined
The first IP address in the display indicates the server that is used for the automatic installation. The
second IP address indicates the TFTP server that provided the configuration file.
show auto install status
Modification
This command was introduced on the Catalyst 4500 series switch.
: Downloading config file
: 20.0.0.1
: 30.0.0.3
Catalyst 4500 Series Switch Cisco IOS Command Reference—Release XE 3.9.xE and 15.2(5)Ex
show auto install status
2-677