Cisco Catalyst 4500 Series Configuration Manual page 906

show mac access-group interface
show mac access-group interface
To display the ACL configuration on a Layer 2 interface, use the show mac access-group interface
command.
Syntax Description interface
interface-number
Command Default
This command has no default settings.
Command Modes Privileged EXEC mode
Command History Release
12.1(19)EW
Usage Guidelines
The valid values for the port number depend on the chassis used.
Examples The following example shows how to display the ACL configuration on interface fast 6/1:
Switch# show mac access-group interface fast 6/1
Interface FastEthernet6/1:
Inbound access-list is simple-mac-acl
Outbound access-list is not set
Related Commands Command
access-group mode
Catalyst 4500 Series Switch Cisco IOS Command Reference—Release XE 3.9.xE and 15.2(5)Ex
2-858
show mac access-group interface [interface interface-number]
(Optional) Specifies the interface type; valid values are ethernet, fastethernet,
gigabitethernet, tengigabitethernet, pos, atm, port-channel, and ge-wan.
(Optional) Specifies the port number.
Modification
This command was introduced on the Catalyst 4500 series switch.
Description
Specifies the override modes (for example, VACL
overrides PACL) and the non-override modes (for example,
merge or strict mode).
Chapter 2
OL-30934-01