Cisco Catalyst 4500 Series Configuration Manual page 932

show macro auto monitor clients
show macro auto monitor clients
To display the clients using the device classifier facility on the switch, use the show macro auto monitor
clients user EXEC command.
Syntax Description This command has no arguments or keywords.
Command Default
User EXEC
Privileged EXEC
Command History Release
Release IOS XE 3.3.0
SG (15.1(1)SG)
Usage Guidelines Device classifier (DC) is enabled by default when you enable a client application (for example, Auto
Smartports) that uses its functionality. Use the show macro auto monitor clients command to display
the clients that are using the DC feature on the switch.
As long as any clients are using the DC, you cannot disable it by using the no macro auto monitor
command. If you attempt to disable the DC while a client is using it, an error message appears.
Examples
The following example shows how to use the show macro auto monitor clients privileged EXEC
command to view the clients using the DC on the switch:
Switch# show macro auto monitor clients
Client Name
====================
Auto Smart Ports
The following example shows the error message that appears when you attempt to disable DC while a
client is using it:
Switch(config)# no macro auto monitor
These subsystems should be disabled before disabling Device classifier
Auto Smart Ports
% Error - device classifier is not disabled
Related Commands Command
macro auto device
macro auto execute (built-in
function)
macro auto global processing
Catalyst 4500 Series Switch Cisco IOS Command Reference—Release XE 3.9.xE and 15.2(5)Ex
2-884
show macro auto monitor clients
Modification
This command was introduced on the Catalyst 4500 series switch.
Description
Configures macro default parameter values.
Configures mapping from an event trigger to a built-in macro.
Enables Auto Smartports on a switch.
Chapter 2
OL-30934-01