ip igmp query-interval
Related Commands
Command
ip igmp querier-timeout (refer to Cisco
IOS documentation)
ip pim query-interval (refer to Cisco
IOS documentation)
show ip igmp groups (refer to Cisco IOS
documentation)
Catalyst 4500 Series Switch Cisco IOS Command Reference—Release XE 3.9.xE and 15.2(5)Ex
2-336
Description
Configures the timeout period before the router takes over
as the querier for the interface after the previous querier has
stopped querying.
Configures the frequency of Protocol Independent
Multicast (PIM) router query messages.
Displays the multicast groups with receivers that are
directly connected to the router and that were learned
through Internet Group Management Protocol (IGMP), use
the show ip igmp groups command in EXEC mode.
Chapter 2