Cisco Catalyst 4500 Series Configuration Manual page 683

Chapter 2
revision
To set the MST configuration revision number, use the revision command. To return to the default settings,
use the no form of this command.
Syntax Description
version
Command Default Revision version is set to 0.
Command Modes MST configuration mode
Command History Release
12.1(12c)EW
Usage Guidelines If two Catalyst 4500 series switches have the same configuration but have different configuration
revision numbers, they are considered to be part of two different regions.
Caution Be careful when using the revision command to set the MST configuration revision number because a
mistake can put the switch in a different region.
Examples The following example shows how to set the configuration revision number:
Switch(config-mst)# revision 5
Switch(config-mst)#
Related Commands Command
instance
name
show spanning-tree mst
spanning-tree mst configuration
revision version
no revision
Configuration revision number; valid values are from 0 to 65535.
Modification
This command was introduced on the Catalyst 4500 series switch.
Catalyst 4500 Series Switch Cisco IOS Command Reference—Release XE 3.9.xE and 15.2(5)Ex
Description
Maps a VLAN or a set of VLANs to an MST instance.
Sets the MST region name.
Displays MST protocol information.
Enters the MST configuration submode.
revision
2-643