Cisco Catalyst 4500 Series Configuration Manual page 319

Chapter 2 Cisco IOS Commands for the Catalyst 4500 Series Switches
hw-module system max-port-num-mode 1/2 switch 1/2/all
This command is supported only in VSS mode on a 10-slot chassis.
Note
To enable support for the WS-X4640-CSFP-E linecard in a 10-slot chassis which is present in VSS, use
hw-module system max-port-num-mode 2 switch 1, hw-module system max-port-num-mode 2
switch 2, or hw-module system max-port-num-mode 2 switch All commands. (1, 2, and All (both
switches) specify the switch number to which max-port-num-mode applies.)
To restore the default mode, use hw-module system max-port-num-mode 1 switch 1, hw-module
system max-port-num-mode 1 switch 2, hw-module system max-port-num-mode 1 switch All or the
no form of the commands.
Syntax Description hw-module system
max-port-num-mode 2 switch 1
hw-module system
max-port-num-mode 2 switch 2
hw-module system
max-port-num-mode 2 switch All
hw-module system
max-port-num-mode 1 switch 1
hw-module system
max-port-num-mode 1 switch 2
hw-module system
max-port-num-mode 1 switch All
no hw-module system
max-port-num-mode 1 switch 1
no hw-module system
max-port-num-mode 1 switch 2
no hw-module system
max-port-num-mode 1 switch All
no hw-module system
max-port-num-mode 2 switch 1
[no] hw-module system max-port-num-mode 1 switch 1.
[no] hw-module system max-port-num-mode 1 switch 2,
[no] hw-module system max-port-num-mode 1 switch All
[no] hw-module system max-port-num-mode 2 switch 1
[no] hw-module system max-port-num-mode 2 switch 2,
[no] hw-module system max-port-num-mode 2 switch All
Catalyst 4500 Series Switch Cisco IOS Command Reference—Release XE 3.9.xE and 15.2(5)Ex
hw-module system max-port-num-mode 1/2 switch 1/2/all
Enables a chassis with 80 ports and five linecard slots for switch
1.
Enables a chassis with 80 ports and five linecard slots for switch
2.
Enables a chassis with 80 ports and five linecard slots for switch
1 and 2.
Restores the default mode (48 ports and 8 Line card slots) for
switch 1.
Restores the default mode (48 ports and 8 Line card slots) for
switch 2.
Restores the default mode (48 ports and 8 Line card slots) for
switches 1 and 2.
Restores the default mode (48 ports and 8 Line card slots) for
switch 1.
Restores the default mode(48 ports and 8 Line card slots) for
switch 2.
Restores the default mode (48 ports and 8 Line card slots) for
switches 1 and 2.
Restores the default mode (48 ports and 8 Line card slots) for
switch 1.
2-281