Cisco Catalyst 4500 Series Configuration Manual page 713

Chapter 2
Switch(config)# end
Related Commands Command
macro auto global processing
macro auto processing
show shell
macro auto device
macro auto execute (builtin
function)
macro auto execute
(user-defined function)
macro auto execute
(remotely-defined function)
macro auto processing
macro auto sticky
Description
Enables Auto Smartports on a switch.
Enable Auto SmartPorts macros on a specific interface.
Displays information about event triggers and macros.
Simplifies changing the parameters for a built-in functions for a
device type.
Changes built-in function default values or to map user-defined
triggers to built-in functions, and to pass the parameter values.
Maps a trigger to a user-defined function.
Maps a trigger to a remotely defined functions.
Enables Auto SmartPorts macros on a specific interface.
Specifies not to remove configurations applied by ASP across link
flaps and device removal.
Catalyst 4500 Series Switch Cisco IOS Command Reference—Release XE 3.9.xE and 15.2(5)Ex
shell trigger
2-673