Cisco Catalyst 4500 Series Configuration Manual page 460

license right-to-use activate
license right-to-use activate
This command applies only to Catalyst 4500X, as well as Supervisor Engine 7-E, 7L-E, and 8-E.
Note
To activate PRTU licenses use the license right-to-use activate command.
Syntax Description
feature-name
acceptEula
Command Default PRTU licenses are inactive
Command Modes privileged EXEC mode
Command History Release
IOS XE 3.4.2SG
Usage Guidelines Use this command to activate PRTU licenses that are inactive.
Downloading the license file from cisco portal and installing the license are not required. The PRTU
licenses are bundled with image. Because the PRTU license is of highest precedence, when the PRTU
license is activated, other license of the same feature switch to inactive state.
Examples The following example shows how to activate PRTU licenses:
Switch# license right-to-use activate entservices
Related Commands Command
license right-to-use
deactivate
Catalyst 4500 Series Switch Cisco IOS Command Reference—Release XE 3.9.xE and 15.2(5)Ex
2-420
license right-to-use activate feature-name [acceptEula]
Specifies the feature name (e.g., entservices, ipbase, lanbase)
(Optional). Activates the PRTU license. The End User License Agreement is
accepted but does not display.
Modification
This command was introduced on the Catalyst 4500 series switch.
Description
Deactivates the PRTU license
Chapter 2