Show Vlan Dot1Q Tag Native - Cisco Catalyst 4500 Series Configuration Manual

Chapter 2

show vlan dot1q tag native

To display all the ports on the switch that are eligible for native VLAN tagging as well as their current
native VLAN tagging status, use the show vlan dot1q tag native command.
Syntax Description This command has no arguments or keywords.
Command Default
This command has no default settings.
Command Modes
User EXEC mode
Command History Release
12.1(18)EW
Examples
This is an example of output from the show vlan dot1q tag native command:
Switch# show vlan dot1q tag native
dot1q native vlan tagging is disabled globally
Per Port Native Vlan Tagging State
----------------------------------
Port
------------------------------------
f3/2
f3/16
f3/16
Related Commands Command
switchport mode
vlan (global configuration) (refer to
Cisco IOS documentation)
vlan (VLAN configuration) (refer to
Cisco IOS documentation)
show vlan dot1q tag native
Modification
This command was introduced on the Catalyst 4500 series switch.
Operational Native VLAN
Mode Tagging State
trunk enabled
PVLAN trunk disabled
trunk enabled
Catalyst 4500 Series Switch Cisco IOS Command Reference—Release XE 3.9.xE and 15.2(5)Ex
Description
Sets the interface type.
Enters global VLAN configuration mode.
Enters VLAN configuration mode.
show vlan dot1q tag native
2-997