Cisco Catalyst 4500 Series Configuration Manual page 931

Chapter 2
show macro auto interface
Use the show macro auto interface command to display Auto SmartPorts status and the functions
applied on an interface.
Syntax Description interface_id
Command Default
None
Command Modes Global configuration
Command History Release
12.2(54)SG
Examples
The following example shows how to display Auto SmartPorts status and the applied macros:
Switch# show macro auto int gi3/8
Global Auto Smart Port Status
Auto Smart Ports Enabled
Fallback : CDP
Interface
--------------------------------------------------------------
Gi3/8
Related Commands Command
show macro auto device
show macro auto interface interface_id
Specifies an interface ID.
Modification
This command was introduced on the Catalyst 4500 series switch.
Disabled, LLDP Disabled
Auto Smart Port
TRUE
Catalyst 4500 Series Switch Cisco IOS Command Reference—Release XE 3.9.xE and 15.2(5)Ex
Fallback Macro Description(s)
None CISCO_PHONE_EVENT
Description
Displays the default information for a device, including builtin
function name and the parameters that can be provided for the
commands when executing the builtin function.
show macro auto interface
2-883