Cisco Catalyst 4500 Series Configuration Manual page 773

Chapter 2
show fabric domain
To display your fabric domain configuration, use the show fabric domain command.
Command Default
Default domain and default context.
Command Modes
Privileged EXEC
Command History Release
3.9.01E
Usage Guidelines Use the command to display a summary of the fabric domain.
Examples This is sample output for the show fabric domain command, for an edge device.
device#show fabric domain
Fabric Domain : "default"
Role : Edge
Control-Plane Service: Disabled
Number of "Control-Plane" node(s): 2
IP Address
---------------------------------
192.168.1.4
192.168.1.5
Number of "Border" node(s): 1
IP Address
---------------
192.168.1.6
Number of context(s): 2
Codes: * - Not Configured
Name
------------------------------------------------
default
example-context
show fabric domain
Modification
This command was introduced on the Catalyst 4500-E series switch using a
Supervisor Engines 8-E and 8L-E.
Auth-key
example-key1
example-key2
ID
0
10
Catalyst 4500 Series Switch Cisco IOS Command Reference—Release XE 3.9.xE and 15.2(5)Ex
Host-pools
*
1
show fabric domain
2-725