Show Vlan Counters - Cisco Catalyst 4500 Series Configuration Manual

show vlan counters

show vlan counters
To display the software-cached counter values, use the show vlan counters command.
Syntax Description
id vlanid
Command Default This command has no default settings.
Command Modes Privileged EXEC mode
Command History Release
12.1(13)EW
Usage Guidelines If you enter the show vlan counters command without specifying the VLAN ID, the software-cached
counter values for all VLANs are displayed.
Examples The following example shows how to display the software-cached counter values for a specific VLAN:
Switch# show vlan counters
* Multicast counters include broadcast packets
Vlan Id
L2 Unicast Packets
L2 Unicast Octets
L3 Input Unicast Packets
L3 Input Unicast Octets
L3 Output Unicast Packets
L3 Output Unicast Octets
L3 Output Multicast Packets
L3 Output Multicast Octets
L3 Input Multicast Packets
L3 Input Multicast Octets
L2 Multicast Packets
L2 Multicast Octets
Switch>
Related Commands Command
clear vlan counters
Catalyst 4500 Series Switch Cisco IOS Command Reference—Release XE 3.9.xE and 15.2(5)Ex
2-996
show vlan [id vlanid] counters
(Optional) Displays the software-cached counter values for a specific VLAN.
Modification
This command was introduced on the Catalyst 4500 series switches.
: 1
: 0
: 0
: 0
: 0
: 0
: 0
: 0
: 0
: 0
: 0
: 1
: 94
Description
Clears the software-cached counter values to start from
zero again for a specified VLAN or all existing VLANs.
Chapter 2
OL-30934-01