Chapter 2
pppoe intermediate-agent (global)
To enable the PPPoE Intermediate Agent feature on a switch, use the pppoe intermediate-agent global
configuration command. To disable the feature, use the no form of this command.
Syntax Description
This command has no arguments or keywords.
Command Default
disabled
Command Modes
Global configuration mode
Command History
Release
12.2(50)SG
Usage Guidelines
You must enable PPPoE Intermediate Agent globally on a switch before you can use
PPPoE Intermediate Agent on an interface or interface VLAN.
Examples
The following example shows how to enable PPPoE Intermediate Agent on a switch:
Switch(config)# pppoe intermediate-agent
The following example shows how to disable PPPoE Intermediate Agent on a switch:
Switch(config)# no pppoe intermediate-agent
Related Commands
Command
pppoe intermediate-agent
(global)
pppoe intermediate-agent
no pppoe intermediate-agent
Modification
This command was introduced on the Catalyst 4500 series switch.
Catalyst 4500 Series Switch Cisco IOS Command Reference—Release XE 3.9.xE and 15.2(5)Ex
Description
Sets the access node identifier, generic error message, and
identifier string for a switch.
pppoe intermediate-agent (global)
2-587