Cisco Catalyst 4500 Series Configuration Manual page 612
Ios software configuration guide isco ios xe 3.9.0e and ios 15.2(5)ex
Hide thumbs
Also See for Catalyst 4500 Series:
- Software configuration manual (2086 pages) ,
- Administration manual (1814 pages) ,
- Configuration manual (1610 pages)
Table of Contents
Advertisement
power inline consumption
Examples
The following example shows how to set the Power over Ethernet allocation to use 8000 mW, regardless
of any CDP packet that is received from the powered device:
Switch# configure terminal
Enter configuration commands, one per line. End with CNTL/Z.
Switch(config)# power inline consumption default 8000
Switch(config)# end
Switch#
Related Commands
Command
power inline
show power
Catalyst 4500 Series Switch Cisco IOS Command Reference—Release XE 3.9.xE and 15.2(5)Ex
2-572
Description
Sets the inline-power state for the inline-power-capable
interfaces.
Displays information about the power status.
Chapter 2
Advertisement
Table of Contents
