Clear Interface Gigabitethernet - Cisco Catalyst 4500 Series Configuration Manual

clear interface gigabitethernet

clear interface gigabitethernet
To clear the hardware logic from a Gigabit Ethernet IEEE 802.3z interface, use the clear interface
gigabitethernet command.
This command does not increment interface resets as displayed with the show interface
Note
gigabitethernet mod/port command.
Syntax Description mod/port
Command Default This command has no default settings.
Command Modes
Privileged EXEC mode
Command History Release
12.1(8a)EW
Examples The following example shows how to clear the hardware logic from a Gigabit Ethernet IEEE 802.3z
interface:
Switch# clear interface gigabitethernet 1/1
Switch#
Related Commands Command
show interfaces status
Catalyst 4500 Series Switch Cisco IOS Command Reference—Release XE 3.9.xE and 15.2(5)Ex
2-106
clear interface gigabitethernet mod/port
Number of the module and port.
Modification
This command was introduced on the Catalyst 4500 series switch.
Chapter 2 Cisco IOS Commands for the Catalyst 4500 Series Switches
Description
Displays the interface status.
OL-30934-01