Chapter 2
Table 2-28
Field
Proxy ARP
Security level
Split horizon
ICMP redirects
ICMP unreachables
ICMP mask replies
IP fast switching
IP SSE switching
Router Discovery
IP output packet accounting
TCP/IP header compression
Probe proxy name
WCCP Redirect outbound is
enabled
WCCP Redirect exclude is
disabled
Netflow Data Export (hardware)
is enabled
show ip interface Field Descriptions (continued)
Description
Status of whether Proxy Address Resolution Protocol (ARP) is
enabled for the interface.
IP Security Option (IPSO) security level set for this interface.
Status of split horizon.
Status of the redirect messages on this interface.
Status of the unreachable messages on this interface.
Status of the mask replies on this interface.
Status of whether fast switching has been enabled for this
interface. Fast switching is typically enabled on serial interfaces,
such as this one.
Status of the IP silicon switching engine (SSE).
Status of the discovery process for this interface. It is typically
disabled on serial interfaces.
Status of IP accounting for this interface and the threshold
(maximum number of entries).
Status of compression.
Status of whether the HP Probe proxy name replies are generated.
Status of whether packets that are received on an interface are
redirected to a cache engine.
Status of whether packets that are targeted for an interface are
excluded from being redirected to a cache engine.
NDE hardware flow status on the interface.
Catalyst 4500 Series Switch Cisco IOS Command Reference—Release XE 3.9.xE and 15.2(5)Ex
show ip interface
2-793