Cisco Catalyst 4500 Series Configuration Manual page 347
Ios software configuration guide isco ios xe 3.9.0e and ios 15.2(5)ex
Hide thumbs
Also See for Catalyst 4500 Series:
- Software configuration manual (2086 pages) ,
- Administration manual (1814 pages) ,
- Configuration manual (1610 pages)
Table of Contents
Advertisement
Chapter 2
The following example shows how to configure the logging rate to 10 logs per 3 seconds:
Switch(config)# ip arp inspection log-buffer logs 10 interval 3
Switch(config)# end
Switch# show ip arp inspection log
Total Log Buffer Size : 45
Syslog rate : 10 entries per 3 seconds.
No entries in log buffer.
Switch#
Related Commands
Command
arp access-list
show ip arp inspection
Catalyst 4500 Series Switch Cisco IOS Command Reference—Release XE 3.9.xE and 15.2(5)Ex
Description
Defines an ARP access list or adds clauses at the end of a
predefined list.
Displays the status of dynamic ARP inspection for a
specific range of VLANs.
ip arp inspection log-buffer
2-307
Advertisement
Table of Contents
