Chapter 2
show errdisable detect
To display the error disable detection status, use the show errdisable detect command.
Syntax Description
This command has no arguments or keywords.
Command Default
This command has no default settings.
Command Modes
Privileged EXEC mode
Command History
Release
12.1(8a)EW
12.1(19)EW
Usage Guidelines
A displayed
The error-disable reasons in the command output are listed in alphabetical order. The mode column
shows how error disable is configured for each feature.
You can configure error-disabled detection in these modes:
•
•
•
Examples
This is an example of output from the show errdisable detect command:
Switch> show errdisable detect
ErrDisable Reason
-----------------
arp-inspection
bpduguard
channel-misconfig
community-limit
dhcp-rate-limit
dtp-flap
gbic-invalid
inline-power
invalid-policy
l2ptguard
link-flap
loopback
lsgroup
pagp-flap
show errdisable detect
Modification
This command was introduced on the Catalyst 4500 series switch.
Display includes the status of storm control.
error reason refers to an invalid small form-factor pluggable (SFP) module.
gbic-invalid
port mode—The entire physical port is error disabled if a violation occurs.
vlan mode—The VLAN is error disabled if a violation occurs.
port/vlan mode—The entire physical port is error disabled on some ports and per-VLAN error
disabled on other ports.
Detection
---------
Enabled
Enabled
Enabled
Enabled
Enabled
Enabled
Enabled
Enabled
Enabled
Enabled
Enabled
Enabled
Enabled
Enabled
Catalyst 4500 Series Switch Cisco IOS Command Reference—Release XE 3.9.xE and 15.2(5)Ex
Mode
----
port
vlan
port
port
port
port
port
port
port
port
port
port
port
port
show errdisable detect
2-717