Reassembly - Honda Civic Service Manual

Power Steering Pump
Reassembly (cont'dl
C o a t t h e O - r i n g w i t h p o w e r s t e e r i n g f l u i d , a n d
install it into the grooves in the inlet joint.
Install the inlet joint on the pump housing.
'11 N.m (1.1 kgt.m,
8 |bnft)
I n s t a l l t h e p u l l e y a s s h o w n b e l o w , t h e n l o o s e l y
install the pulley nut. Hold the steering pump in a
vise with soft jaws.
CAUTION: Be car€ful not io damage the pump hous-
ing with the jaws ot the vise.
15.2 x 2.4
Replace.
-
EI
17-46
21. Hold the pulley with the specialtool, and tighten the
pulley nut.
UNIVERSAL HOLDER
PULLEY NUT
64 N.m {6.5 kgf.m,
Check that the pump turns smoothly by turning the
pulley by hand.