Configuring Default Afids; Configuring Individual Afids - Cisco AP775A - Nexus Converged Network Switch 5010 Configuration Manual

Manual IVR Configuration
S e n d d o c u m e n t a t i o n c o m m e n t s t o m d s f e e d b a c k - d o c @ c i s c o . c o m
You can only use AFID configuration when the VSAN topology mode is automatic. In user-configured
Note
VSAN topology mode, the AFIDs are specified in the VSAN topology configuration itself and a separate
AFID configuration is not needed.

Configuring Default AFIDs

To configure default AFIDs using Fabric Manager, follow these steps:
Expand All VSANs and then select IVR in the Logical Domains pane.
Step 1
You see the IVR configuration in the Information pane.
Click the Default Fabric ID tab to display the existing default AFIDs.
Step 2
Click the Create Row icon to create a default AFID.
Step 3
Check the check boxes next to each switch involved in IVR that you want to use this default AFID.
Step 4
Provide a name for each SwitchWWN and set the default Fabric ID.
Step 5
Click Create to create this entry.
Step 6
Repeat
Step 7

Configuring Individual AFIDs

To configure individual AFIDs using Fabric Manager, follow these steps:
Expand All VSANs and then select IVR in the Logical Domains pane.
Step 1
You see the IVR configuration in the Information pane.
Figure 29-5
Click the Fabric ID tab to display the existing AFIDs (see
Step 2
Click the Create Row icon to create an AFID.
Step 3
Cisco MDS 9000 Family Fabric Manager Configuration Guide
29-12
Step 1 through Step 6 for all default AFIDs that you want to configure in your IVR topology.
Fabric ID Tab
Chapter 29 Configuring Inter-VSAN Routing
Figure 29-5).
OL-17256-03, Cisco MDS NX-OS Release 4.x