Chapter 46
Configuring Port Security
S e n d d o c u m e n t a t i o n c o m m e n t s t o m d s f e e d b a c k - d o c @ c i s c o . c o m
You see Edit and Activate Configuration page as shown in
Figure 46-3
Click Insert to create port binding.
Step 5
You see the Insert Port Security Devices dialog box as shown in
Figure 46-4
Two types of port binding can be created using the Insert Port Security Devices dialog box:
Step 6
Port WWN-pWWN bound to an interface WWN.
•
•
Switch-Switch WWN bound to an interface. (Mainly useful for ISL binding.)
Step 7
Select the type of port binding by clicking the radio buttons and enter the supporting values.
Step 8
Click OK.
OL-17256-03, Cisco MDS NX-OS Release 4.x
Edit and Activate Configuration Page
Insert Port Security Devices Dialog Box
Cisco MDS 9000 Family Fabric Manager Configuration Guide
Port Security Configuration Guidelines
Figure
46-3.
Figure
46-4.
46-7