Default Port Numbers; Npv Cfs Distribution Over Ip; Npv Traffic Management; Auto - Cisco AP775A - Nexus Converged Network Switch 5010 Configuration Manual

Fabric manager configuration guide, release 4.x
Hide thumbs Also See for AP775A - Nexus Converged Network Switch 5010:
Table of Contents

Advertisement

Chapter 21
Configuring N Port Virtualization
S e n d d o c u m e n t a t i o n c o m m e n t s t o m d s f e e d b a c k - d o c @ c i s c o . c o m

Default Port Numbers

Port numbers on NPV-enabled switches will vary depending on the switch model. For details about port
numbers for NPV-eligible switches, see

NPV CFS Distribution over IP

NPV devices use only IP as the transport medium. CFS uses multicast forwarding for CFS distribution.
NPV devices do not have ISL connectivity and FC domain. To use CFS over IP, multicast forwarding has
to be enabled on the ethernet IP switches all along the network that physically connects the NPV switch.
You can also manually configure the static IP peers for CFS distribution over IP on NPV-enabled
switches. For more information, see the
page

NPV Traffic Management

This sections discusses the following aspects of load balancing:

Auto

Before Cisco MDS SAN-OS Release 3.3(1a), NPV supported automatic selection of external links.
When a server interface is brought up, an external interface with the minimum load is selected from the
available links. There is no manual selection on the server interfaces using the external links. Also, when
a new external interface was brought up, the existing load was not distributed automatically to the newly
available external interface. This newly brought up interface is used only by the server interfaces that
come up after this interface.

Traffic Map

As in Cisco MDS SAN-OS Release 3.3(1a) and NX-OS Release 4.1(1a), NPV supports traffic
management by allowing you to select and configure the external interfaces that the server uses to
connect to the core switches.
When the NPV traffic management is configured, the server uses only the configured external interfaces.
Note
Any other available external interface will not be used.
The NPV traffic management feature provides the following benefits:
OL-17256-03, Cisco MDS NX-OS Release 4.x
7-17.
Auto, page 21-5
Traffic Map, page 21-5
Disruptive, page 21-6
Facilitates traffic engineering by providing dedicated external interfaces for the servers connected
to NPV.
Uses the shortest path by selecting external interfaces per server interface.
Uses the persistent FC ID feature by providing the same traffic path after a link break, or reboot of
the NPV or core switch.
Chapter 11, "On-Demand Port Activation Licensing."
"Configuring Static IP Peers for CFS over IP" section on
Cisco MDS 9000 Family Fabric Manager Configuration Guide
About NPV
21-5

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents