Deleting Common Roles; About The Vsan Policy - Cisco AP775A - Nexus Converged Network Switch 5010 Configuration Manual

Chapter 39 Configuring Users and Common Roles
S e n d d o c u m e n t a t i o n c o m m e n t s t o m d s f e e d b a c k - d o c @ c i s c o . c o m
You see the Create Roles dialog box in
Figure 39-2
Select the switches on which to configure a role.
Step 3
Enter the name of the role in the Name field.
Step 4
Enter the description of the role in the Description field.
Step 5
(Optional) check the Enable check box to enable the VSAN scope and enter the list of VSANs in the
Step 6
Scope field to which you want to restrict this role.
Click Create to create the role, or click Close to close the Roles - Create dialog box without creating
Step 7
the common role.
Device Manager automatically creates six roles that are required for Device Manager to display a view
Note
of a switch. These roles are system, snmp, module, interface, hardware, and environment.

Deleting Common Roles

To delete a common role using Fabric Manager, follow these steps:
Expand Switches > Security and then select Users and Roles from the Physical Attributes pane. Click
Step 1
the Roles tab in the Information pane.
Click the role you want to delete.
Step 2
Click Delete Row to delete the common role.
Step 3
Click Yes to confirm the deletion or No to cancel it.
Step 4

About the VSAN Policy

Configuring the VSAN policy requires the ENTERPRISE_PKG license (see
Installing
OL-17256-03, Cisco MDS NX-OS Release 4.x
Create Roles Dialog Box
Licenses").
Figure 39-2.
Cisco MDS 9000 Family Fabric Manager Configuration Guide
Role-Based Authorization
Chapter 10, "Obtaining and
39-3