Cisco AP775A - Nexus Converged Network Switch 5010 Configuration Manual page 953

Chapter 44 Configuring IPsec Network Security
S e n d d o c u m e n t a t i o n c o m m e n t s t o m d s f e e d b a c k - d o c @ c i s c o . c o m
You see the IKE configuration in the Information pane (see
Figure 44-13
Select the Initiator Version tab.
Step 2
You see the existing initiator versions for the peers in the Information pane.
Click Create Row to create an initiator version.
Step 3
You see the Create Initiator Version dialog box shown in
Figure 44-14
Step 4 Select the Switches for the remote peer for which this IKE protocol initiator is configured.
Step 5 Enter the IP address of the remote peer.
IKEv1 represents the IKE protocol version used when connecting to a remote peer.
OL-17256-03, Cisco MDS NX-OS Release 4.x
IKE Configuration
Create Initiator Version Dialog Box
Cisco MDS 9000 Family Fabric Manager Configuration Guide
Optional IKE Parameter Configuration
Figure 44-13).
Figure 44-14.
44-19