Deleting Cfs Regions - Cisco AP775A - Nexus Converged Network Switch 5010 Configuration Manual

Chapter 13 Using the CFS Infrastructure
S e n d d o c u m e n t a t i o n c o m m e n t s t o m d s f e e d b a c k - d o c @ c i s c o . c o m
Figure 13-12
Double-click the RegionId cell in the required row.
Step 3
The cursor blinks in the cell prompting a change in the value.
Step 4 Change the RegionId value to the required region.
Step 5 Click the Apply Changes button on the tool bar to commit the change.
Removing a Feature from a Region
To remove a feature from a region using Fabric Manager, follow these steps:
Click the Feature by Region tab and select the required row.
Step 1
Click the Delete Row button on the toolbar.
Step 2
Figure 13-13
Figure 13-13
Click Yes to confirm row deletion from the table in view.
Step 3

Deleting CFS Regions

To delete an entire region, follow these steps:
Click the All Regions tab and select the required row.
Step 1
Click Delete Row.
Step 2
This action removes all entries pertaining to that switch and region in the table under Feature by Region
tab.
OL-17256-03, Cisco MDS NX-OS Release 4.x
Feature by Region Tab
shows a confirmation dialog box.
Removing a Feature from a Region
Cisco MDS 9000 Family Fabric Manager Configuration Guide
CFS Regions
13-19