Assigning Snmpv3 Users To Multiple Roles - Cisco AP775A - Nexus Converged Network Switch 5010 Configuration Manual

Creating and Modifying Users
S e n d d o c u m e n t a t i o n c o m m e n t s t o m d s f e e d b a c k - d o c @ c i s c o . c o m
Select a VSAN in the Logical Domains pane. This will not work if you select All VSANS.
Step 1
Expand Switches > Security and then select Users and Roles in the Physical Attributes pane. Click the
Step 2
Global tab in the Information pane.
Check the GlobalEnforcePriv check box.
Step 3
Click the Apply Changes icon to save these changes.
Step 4

Assigning SNMPv3 Users to Multiple Roles

The SNMP server user configuration is enhanced to accommodate multiple roles (groups) for SNMPv3
users. After the initial SNMPv3 user creation, you can map additional roles for the user.
Only users belonging to a network-admin role can assign roles to other users.
Note
To add multiple roles to a new user using Fabric Manager, follow these steps:
Step 1 Expand Switches > Security and then select Users and Roles from the Physical Attributes pane.
Step 2 Click the Users tab in the Information pane to see a list of users like the one in
Step 3 Click Create Row.
You see the Create Users dialog box shown in
Figure 40-4
Step 4 Choose roles using the check boxes.
Step 5 Choose an option for Digest and one for Encryption.
Cisco MDS 9000 Family Fabric Manager Configuration Guide
40-6
Create Users Dialog Box
Figure 40-4.
OL-17256-03, Cisco MDS NX-OS Release 4.x
Chapter 40 Configuring SNMP
Figure 40-2.