Cisco AP775A - Nexus Converged Network Switch 5010 Configuration Manual page 370

Using the File System
S e n d d o c u m e n t a t i o n c o m m e n t s t o m d s f e e d b a c k - d o c @ c i s c o . c o m
Figure 16-7
Select the device and partition from the drop-down lists for the directory containing the file you want to
Step 2
copy.
Click Copy.
Step 3
You see the Copy dialog box shown in
Figure 16-8
Step 4 Choose the protocol you want to use for the copy process: tftp, ftp, scp, or flashToFlash.
Step 5 Enter the address of the source server for a flash to flash copy only.
Click the ... button to browse for the source file on your local PC or on the server, depending on the type
Step 6
of copy.
Note
Enter the Switch Destination File name. (See the note in Step 6.)
Step 7
Cisco MDS 9000 Family Fabric Manager Configuration Guide
16-6
Flash Files Dialog Box
Copy Flash Files in Device Manager
If you are copying from flash, the filename must be in the format:
[device>:][<partition>:]<file>
Where device is a value obtained from FlashDeviceName, partition is a value obtained from
FlashPartitionName and file is the name of a file in flash.
Figure 16-8.
Chapter 16 Managing Configuration Files
OL-17256-03, Cisco MDS NX-OS Release 4.x