Displaying Session Status; About Contiguous Domain Id Assignments; Enabling Contiguous Domain Id Assignments - Cisco AP775A - Nexus Converged Network Switch 5010 Configuration Manual

Chapter 25 Configuring Domain Parameters
S e n d d o c u m e n t a t i o n c o m m e n t s t o m d s f e e d b a c k - d o c @ c i s c o . c o m

Displaying Session Status

To display the status of the distribution session using Fabric Manager, follow these steps:
Expand Fabricxx > VSANxx > Domain Manager and then select Allowed in the Logical Domains pane
Step 1
for the fabric and VSAN for which you want to set the allowed domain ID list.
View the CFS configuration and session status in the Information pane.
Step 2

About Contiguous Domain ID Assignments

By default, the contiguous domain assignment is disabled. When a subordinate switch requests the
principal switch for two or more domains and the domains are not contiguous, the following cases apply:
•
•

Enabling Contiguous Domain ID Assignments

OL-17256-03, Cisco MDS NX-OS Release 4.x
If the contiguous domain assignment is enabled in the principal switch, the principal switch locates
contiguous domains and assigns them to the subordinate switches. If contiguous domains are not
available, the NX-OS software rejects this request.
If the contiguous domain assignment is disabled in the principal switch, the principal switch assigns
the available domains to the subordinate switch.
Cisco MDS 9000 Family Fabric Manager Configuration Guide
Domain IDs
25-15