Default Settings - Cisco AP775A - Nexus Converged Network Switch 5010 Configuration Manual

Default Settings

S e n d d o c u m e n t a t i o n c o m m e n t s t o m d s f e e d b a c k - d o c @ c i s c o . c o m
The director history buffer provides a mechanism to determine the change in the port state from the
previous time when a value was contained in the key counter.
To view the directory history buffer using Device Manager, follow these steps:
Choose FICON > VSANs.
Step 1
You see the FICON VSANs dialog box.
Click the Director History button.
Step 2
You see the history buffer dialog box.
Step 3 Click Close to close the dialog box.
Default Settings
Table 36-3
Table 36-3
Parameters
FICON feature
Port numbers
FC ID last byte value
EBCDIC format option
Switch offline state
Mainframe users
Clock in each VSAN
Host clock control
SNMP users
Port address
Prohibited ports
Cisco MDS 9000 Family Fabric Manager Configuration Guide
36-42
lists the default settings for FICON features.
Default FICON Settings
Default
Disabled.
Same as port addresses.
0 (zero).
US-Canada.
Hosts are allowed to move the switch to an offline state.
Allowed to configure FICON parameters on Cisco MDS
switches.
Same as the switch hardware clock.
Allows host to set the clock on this switch.
Configure FICON parameters.
Not blocked.
Ports 90–253 and 255 for the Cisco MDS 9200 Series
switches.
Ports 250–253 and 255 for the Cisco MDS 9500 Series
switches.
OL-17256-03, Cisco MDS NX-OS Release 4.x
Chapter 36 Configuring FICON