Configuring A Zone Using The Zone Configuration Tool - Cisco AP775A - Nexus Converged Network Switch 5010 Configuration Manual

Zone Configuration
S e n d d o c u m e n t a t i o n c o m m e n t s t o m d s f e e d b a c k - d o c @ c i s c o . c o m
Interface-based zoning only works with Cisco MDS 9000 Family switches. Interface-based zoning does
Note
not work if interop mode is configured in that VSAN.

Configuring a Zone Using the Zone Configuration Tool

To create a zone and move it into a zone set using Fabric Manager, follow these steps:
Click the Zone icon in the toolbar (See
Step 1
Figure 30-8
You see the Select VSAN dialog box.
Select the VSAN where you want to create a zone and click OK.
Step 2
You see the Edit Local Full Zone Database dialog box shown in
Figure 30-9
If you want to view zone membership information, right-click in the All Zone Membership(s) column,
and then click Show Details for the current row or all rows from the pop-up menu.
Click Zones in the left pane and click the Insert icon to create a zone.
Step 3
Cisco MDS 9000 Family Fabric Manager Configuration Guide
30-12
Figure
Zone Icon
Edit Local Full Zone Database Dialog Box
Chapter 30
30-8).
Figure 30-9.
OL-17256-03, Cisco MDS NX-OS Release 4.x
Configuring and Managing Zones