Fabric Manager Client Quick Tour: Server Admin Perspective; Fabric Manager Main Window - Cisco AP775A - Nexus Converged Network Switch 5010 Configuration Manual

Chapter 5 Fabric Manager Client
S e n d d o c u m e n t a t i o n c o m m e n t s t o m d s f e e d b a c k - d o c @ c i s c o . c o m
Note

Fabric Manager Client Quick Tour: Server Admin Perspective

Fabric Manager Release 4.1(1b) and later provides a multilevel security system by adding a server admin
role that allows access only to limited features . The configuration capabilities of a server admin role is
limited to FlexAttach and relevant data. server admin can pre-configure SAN for new servers, move a
server to another port on the same NPV device or another NPV device, replace a failed server onto the
same port without involving the SAN administrator. The server role admin will not be able to manage
Fabric Manager users or connected clients.

Fabric Manager Main Window

This section describes the Fabric Manager Client interface that is specific to server admin users as shown
in Figure 5-7
OL-17256-03, Cisco MDS NX-OS Release 4.x
Changes made using Fabric Manager are applied to the running configuration of the switches
that you are managing. If you have made changes to the configuration or performed an operation
(such as activating zones), Fabric Manager prompts you to save your changes before you exit.
Fabric Manager Client Quick Tour: Server Admin Perspective
Cisco MDS 9000 Family Fabric Manager Configuration Guide
5-7