Chapter 18 Managing System Hardware; Running The Compactflash Report - Cisco AP775A - Nexus Converged Network Switch 5010 Configuration Manual

Running the CompactFlash Report

S e n d d o c u m e n t a t i o n c o m m e n t s t o m d s f e e d b a c k - d o c @ c i s c o . c o m
In Device Manager, choose Physical > Inventory.
Step 2
You see a list like the one shown in
Figure 18-2
You see system attributes for multiple modules in
single switch in Device Manager, double click the graphic of the module in the main screen.
Note To configure modules, see
Running the CompactFlash Report
As of Cisco SAN-OS Release 3.1(2) and NX-OS Release 4.1(1b), you can run the CompactFlash Check
Utility to automatically scan your fabric and generate a report that shows the status of CompactFlash on
the following modules:
•
•
•
•
•
•
The CompactFlash report can be used on switches running Cisco SAN-OS Release 2.x, 3.x, and NX-OS
Release 4.x. Before running the CompactFlash report, you must complete the following tasks:
•
•
•
Cisco MDS 9000 Family Fabric Manager Configuration Guide
18-2
Device Manager Hardware Inventory
Chapter 19, "Managing Modules."
DS-X9016
DS-X9032
DS-X9302-14K9
DS-X9308-SMIP
DS-X9304-SMIP
DS-X9530-SF1-K9
Upgrade to Cisco Fabric Manager Release 3.1(2).
Download the CompactFlash Check Utility (m9000-lc1-gplug-mz.1.0.2.bin).
Run the CompactFlash report.
Figure 18-2.
Figure 18-1
Chapter 18 Managing System Hardware
and Figure 18-2. To see attributes for a
OL-17256-03, Cisco MDS NX-OS Release 4.x